Nonwoven Fabric Technology in Hygiene Products: Spunbond, SMS, Spunlace & Air-Through Explained
TECHNOLOGY • #01 7 min read

Nonwoven Fabric Technology in Hygiene Products: Spunbond, SMS, Spunlace & Air-Through Explained

Every layer that touches the skin in a diaper, pad or wet wipe is a nonwoven fabric. Choosing the right technology and basis weight is one of the most important decisions in hygiene product design.

#Spunbond #SMS Barrier #Spunlace Weave #Airthrough ADL
Nonwoven Fabric Technology in Hygiene Products: Spunbond, SMS, Spunlace & Air-Through Explained

Executive Summary & Key B2B Takeaways

  • Nonwovens make up the topsheet, acquisition-distribution layer (ADL), leg cuffs and backsheet of diapers and pads, and the entire substrate of wet wipes.
  • Spunbond and SMS offer strength and liquid barrier; air-through bonding adds loft and fast fluid acquisition; spunlace delivers a textile-like, absorbent wipe.
  • Basis weight (GSM), fibre type and hydrophilic or hydrophobic finish must be matched to each layer's function.
  • Wegnaar checks every incoming nonwoven roll for GSM, tensile strength and strike-through before it reaches the production line.

1. Why Nonwovens Are the Backbone of Modern Hygiene Products

Unlike woven textiles, nonwoven fabrics are made by bonding fibres or filaments together mechanically, thermally or with water jets. This makes them light, economical and highly engineerable, which is exactly what hygiene products require. In a Harmony Care baby diaper, nonwovens account for the soft inner topsheet, the transfer layer below it, the standing leg cuffs and the cloth-like outer cover. In Wegnaar sanitary pads they form the dry-touch surface, and in our wet wipes the nonwoven is the product itself.

Because these layers are in direct and prolonged contact with sensitive skin, the choice of nonwoven determines how soft the product feels, how quickly liquid disappears from the surface, how well the skin can breathe and how reliably leaks are prevented.

2. The Main Nonwoven Technologies at a Glance

Four production technologies dominate the hygiene industry. Each has a distinct role:

TechnologyHow It Is MadeKey PropertiesTypical Use in Hygiene
Spunbond (SB / SSS)Continuous polypropylene filaments laid and thermally bondedStrong, light, economical, smooth surfaceTopsheet, backsheet outer layer, wings
SMS / SMMSSpunbond + meltblown + spunbond layers laminated togetherExcellent liquid barrier, breathableLeg cuffs, barrier layers, core wrap
Air-ThroughBicomponent staple fibres bonded with hot airVery soft, lofty, fast fluid acquisitionPremium topsheet, ADL
SpunlaceFibres entangled with high-pressure water jetsTextile-like feel, absorbent, strong when wetWet wipes, cosmetic pads

Most premium products combine several of these technologies. For example, a soft hydrophilic spunbond topsheet sits over an air-through ADL, while hydrophobic SMS cuffs and a nonwoven-laminated breathable film form the barrier.

GLOBAL B2B MANUFACTURING & OEM PARTNER

Looking for a High-Capacity Hygiene Manufacturer in Turkey?

With 9 fully automated production lines certified to ISO 9001:2015 and CE standards, we supply retail chains and medical distributors across 35+ countries.

3. Topsheet, ADL and Backsheet: Matching the Fabric to the Function

Topsheet

The topsheet must let liquid pass instantly and then stay dry to the touch. It is usually a hydrophilic-treated polypropylene spunbond or air-through fabric. Perforated or embossed variants increase the speed of acquisition and reduce the contact area with the skin.

Acquisition-Distribution Layer (ADL)

Placed between the topsheet and the absorbent core, the ADL is a lofty, often air-through bonded layer that captures a sudden gush of liquid and spreads it along the core. A well-designed ADL is one of the main reasons a diaper shows low rewet and a dry surface.

Leg Cuffs and Backsheet

Leg cuffs are made from hydrophobic SMS, whose meltblown middle layer acts as a fine barrier against leaks while still letting air through. The backsheet combines a microporous breathable PE film with a soft nonwoven outer layer, giving a cloth-like feel and helping to reduce heat and humidity inside the product.

4. Choosing the Right GSM and Finish: A Practical Checklist

Basis weight, measured in grams per square metre (GSM), is a balance between softness, strength, performance and cost. Heavier is not automatically better. When developing a private label specification, our R&D team typically reviews the following points with the customer:

  • Target market and price segment: economy, standard or premium positioning determines the layer structure.
  • Skin feel: finer fibres and air-through bonding give a noticeably softer, more cushioned surface.
  • Hydrophilic durability: the topsheet finish must keep working after repeated insults, not only the first one.
  • Breathability versus barrier: SMS and microporous films must keep liquid in while letting water vapour out.
  • Wipe substrate: spunlace GSM and fibre blend (viscose, polyester, cotton or bamboo-derived viscose) define thickness, strength and lotion capacity.
  • Sustainability goals: plant-based or plastic-free fibres may be preferred for eco-positioned lines.

5. How Wegnaar Controls Nonwoven Quality and Supports Private Label Partners

Under our ISO 9001 quality management system, every nonwoven roll is quarantined on arrival and tested for basis weight, tensile strength, liquid strike-through and visual defects before release to the line. Finished diapers, pads and wipes are then checked again for softness, absorption and dermatological compatibility.

Whether you need an ultra-soft premium diaper, a breathable night pad or a thick spunlace baby wipe, our engineers can help you build the right layer combination for your market and budget. Explore our Private Label (OEM) solutions, browse the product portfolio or contact our export team to request samples and a technical specification.

Frequently Asked Questions (B2B & Export FAQ)

What is the difference between spunbond and SMS nonwoven?

Spunbond consists of continuous filaments bonded together and is mainly used where strength and softness are needed. SMS adds a fine meltblown layer between two spunbond layers, creating a breathable barrier that is ideal for leg cuffs and leak protection.

Which nonwoven is used for wet wipes?

Wet wipes are made from spunlace (hydroentangled) nonwoven. Its fibre blend and basis weight can be tailored, from viscose and polyester blends to plastic-free viscose, cotton or bamboo-derived fibres.

Can I choose the nonwoven specification for my private label diapers?

Yes. For private label projects we offer different topsheet, ADL and backsheet options so the product can be positioned for economy, standard or premium segments.

FREE SAMPLES & CONTAINER LOGISTICS PRICING

Get Technical Specifications & FOB/CIF Container Pricing Today

Discover our flexible MOQ programs, custom packaging design support, and fast 40HC container loading schedules for international importers.

OUR DIGITAL WORLD

Follow Us on Social Media

Be the first to hear about Wegnaar Chemistry’s latest news, sustainability projects, product launches and corporate developments.

Official Corporate Channels Global Communication Network
WhatsApp Danışma Hattı